Rancang Bangun Mokodame : Monitoring Ekosistem Udang Vaname (Litopenaeus vannamei) pada AQUARIUM dengan SISTEM Internet of Things
Abstract
The rapid development of shrimp farming has created problems. One of the main problems in shrimp ponds is the quality of pond water which must be in accordance with the needs of shrimp life, the monitoring process is usually done manually. Internet of Things (IoT) based shrimp pond water quality monitoring is made to make monitoring easier. The device has 2 systems, namely 3 inputs in the form of a temperature sensor, a pH sensor and a salinity sensor, while the output part is an LCD (Liquid Crystal Display), Blynk, water pump, dc fan and dc motor controlled by Arduino Mega 2560. The process of sending data to Blynk uses NodeMcu. Test analysis is done by taking samples from different values. The formula y=a+bx is used in sample processing using linear regression. The average accuracy of each temperature sensor = 99.10%, pH sensor = 99.09% and salinity sensor = 90.98%. The error of each temperature sensor = 0.90%, pH sensor = 0.91% and salinity sensor = 9.12%.
References
Effendi, M.I. (2002). Biologi Perikanan. Jogyakarta : Yayasan Pustaka Nusantara. 163 hlm.
Kholidi, A.N. Trisanto, A. dkk. 2015. Alat Pemberi Pakan dan Pengatur Suhu Otomatis untuk Ayam Pedaging Berbasis Programmable Logic pada Kandang Tertutup. Teknik Elektro. Universitas Lampung.
[KKP] Kementrian Kelautan dan Perikanan 2011. Kelautan dan Perikanan Dalam Angka. Jakarta. 118 hlm.
Multazam, A.E. dan Hasanuddin, Z.B. 2017. Sistem Monitoring Kualitas Air Tambak Udang Vaname.
Panjaitan, A.S. 2012. Pemeliharaan Larva Udang Vaname (Litopenaeus vannamei, Bonne 1931) dengan Pemberian Jenis Fitoplankton yang Berbeda. Skripsi. Universitas Terbuka.
Wiranto, Goib. Hermida, I.D.P. 2010. Pembuatan Sistem Monitoring Kualitas Air Secara Real Time dan Aplikasinya Dalam Pengelolaan Tambak Udang.
Santoso, Budi. and Arfianto, A.D. 2014. Sistem PenggantiAir Berdasarkan Kekeruhan dan Pemberi Pakan Ikan Pada Akuarium Air Tawar Secara Otomatis Berbasis Mikrokontroler Atmega 16.
Sasongko, B, Muhammad, K., dan Sri, R.S., 2013, Perencanaan Pengukuran Kapasitansi Orde Femtofarad Berbasis Rangkaian Aktif Differensial Untuk Sistem Electrical Capasitance Volume Tomography (ECVT), Jurnal Rekayasa dan Teknologi Elektro, Universitas Lampung, Vol. 7, No.1.
Sarif, M., Sugriwan, I., & Fahrudin, A. E. (2016). Jurnal Fisika FLUX Febrikasi Sistem Alat Ukur Temperatur Lapisan Buah Mangga dengan Menggunakan Sensor Waterproof LM35, 13, 111-116.
Supono. 2017. Teknologi Produksi Udang. Plantaxia. Yogyakarta.
