Desain Cetakan Plastik Pot dan Tatakan Pot Tanaman Menggunakan Software Autodesk Pada Mesin Injection Moulding
Abstract
Plastic is one of the most widely used materials in the world, almost all products we find use plastic. There are several plastic material processing processes, one of which uses the injection molding method which is one of the important technologies used to produce various product. The purpose of this research is to design a product of mold design for pots and placemats using computer aided design (CAD) software and simulations performed on solidworks software. The results of this study are based on confidence with a 95% confidence level, the average confirmation experimental value is in the confidence interval range with the simulation results still not stable because they still have a few product defects, one of which is the air trap
References
Kitayama. (2017). Optimasi Multi Objektif Profil Tekanan Pengepakan Variabel dan Parameter Proses dalam Cetakan Injeksi Plastik untuk Meminimalkan Warpage dan Waktu Siklus. 9-12.
Krishnaiah, K., & Shahabudeen, P. (2001). APPLIED DESIGN OF EXPERIMENTS AND TAGUCHI METHODS.
Multi, R. (2021). Perancangan Postre Digital Pada Objek Wisata Untuk Promosi Taman Edelweiss Dimasa Pandemic Covid-19.
Q Shubhra, M. Alam, & M.A. Quaiyyum. (2011). Mechanical Properties of polypropylene composites. Journal of thermoplastic composites materials.
Rizky, M. (2017). PERANCANGAN MESIN PLASTIC MOLDING MENGGUNAKAN PERANGKAT LUNAK AUTODESK INVENTOR PROFESSUINAL 2017.
