Penerapan Pengendalian Proses Inventori Kontrol pada Area Top Board
Abstract
The increasingly advanced and rapid development of industry in Indonesia forces companies to have effective and targeted strategies. One method that can be used to provide fast and precise production process services is to reduce the costs incurred so that the production process runs smoothly and consumer demands can be met quickly and on time. The research methodology used in this research is the observation method. The results of this research are that the finish good capacity is safe if the material stored in the WM10 or WM6 area is less than 25 lots, almost full if WM6 is filled with 26-34 lots, full if WM6 is more than 34 lots. The best method for WINQB software is SES, stock demand and using a stock buffer of 2%. The Top Board material schedule for 17 days is 4749 with a cumulative total of 4861, a percentage of 102.35%. JIT Implementation Results: The number of stocks per week was 4014 and stock was 103, a percentage of 2.56% and a decrease of 99.44%. It can be concluded that the implementation of the JIT system provides a significant reduction in storage.
References
Ahuja, S. &. (2015). Justification of jit study through. International Journal of Process Management .
Arman Hakim Nasution, Y. P. (2008). Perencanaan & pengendalaian. Yogyakarta: Graha Ilmu.
Arman Hakim Nasution, Y. P. (2008). Perencanaan & pengendalian produksi / Arman Hakim Nasution, Yudha Prasetyawan. Yogyakarta: Graha Ilmu.
Assauri. (2008). Management Pemasaran. Jakarta: Raja Grafindo.
Azanella, L. A. (2020, 11 20). Kompas.com. Retrieved from Kompas.com: https://www.kompas.com/tren/read/2020/11/20/141653765/mengenal-tentang-pertashop-keuntungan-syarat-dan-cara-daftarnya
Bicheno. (1987). How to Cut Waste and Delay in Any Manufacturing. IFS Publications. .
Galih, W. (2009). Implementasi Metode Just In Time (JIT) Pada Sistem Produksi Terhadap Efisiensi Biaya Produksi (Studi Pada PT. Citra Bandung Laksana). Bandung: Erlangga.
Ganji, S. &. (2017). Lean production and supply chain innovation in baked foods supplier to improve performance. British Food Journal 119(3):00-00.
Gaspersz, V. (2005). Sistem Manajemen Kinerja Terintegrasi Balanced. Jakarta: Gramedia Pustaka Utama.
Ginting, R. (2007). Sistem produksi. Manajemen perindustrian, 327-330.
Haizer. (2011). Management Operasi. Malang: Salemba Empat.
Harjanto, E. (2007). Manajemen Operasi. Jakarta: Grasindo.
Harsanto. (2013). Dasar Ilmu Manajemen Operasi. Bandung: Unpad Publisher.
Indriyani, P. &. (2015). Analisis PengendalianPersediaan Bahan Baku. Management Analysis Journal. (Online).vol. 4, No. 2,.
Jacobs, F. R. (2016). Manajemen Operasi dan Rantai. Jakarta: Salemba Empat.
Jaelani, E. (2009). Just In Time .
Ohno, T. (1988). The Toyota Production System. Japan: portland.
Rahayu. (2005). Pengaruh Aplikasi Strategi Just In Time Terhadap Efektivitas . Jurnal Ekuita.
Rahayu, A. D. (2015). Analisis Kelayakan Usaha Gula Sumut Anggota Koperasi Serba Usaha (KSU) Jatirogo. Yogyakarta: Program Studi Akuntansi Jurusan Pendidikan Akuntansi Fakultas Ekonomi Universitas Negeri Yogyakarta.
Simamora, H. (2004). Manajemen sumber daya manusia / Henry Simamora. Yogyakarta: STIE YPKN.
Suharsimi, A. (1998). Prosedur Penelitian suatu Pendekatan Praktik. Jakarta: Rineka Cipta.
Tampubolon. (2004). Manajemen Operasional . Jakarta: Ghalia Indonesia.
Umar, H. (2005). Studi Kelayakan Bisnis. Jakarta: Gramedia Pustaka Utama.
